Wikimedia Bugzilla is closed!

I'm using: XP SP1, EasyPHP1-8, Mediawiki-1.5.4, HDD is NTFS-formatted
I installed according to "A very simple installation for Mediawiki on your PC" found in 
"http://meta.wikimedia.org/wiki/Newcomers_guide_to_installing_on_Windows"
EasyPHP is running: apache and mysql is shown started (green traffic light)

When I lauch the Webbrowser Opera (ver 8.5 Build 7700) or InternetExplorer (ver 6.0.2800.
1106.xpsp1) and go to "C:\Programme\EasyPHP1-8\www\mediawiki-1.5.4" I just see which 
files are in the directory. gone to subdirectory "/config" there's just "index.php"
Opening it, it shows a long text including message "Can't write config file, aborting". I 
set the attributes of the whole directory (including the files) to writable, but there's 
no "LocalSettings.php" created. Is it a bug, that there's no such file created? What 
could be my mistake, if not? 

Regarding the other reported errors: the 2 magic_quotes_xxx are "OFF" in my inifile "C:
\Programme\EasyPHP1-8\php\php.ini" but reported as "active". Why are they active then?

Thanks for help!
Michael

PS: whole report:



MediaWiki installation
Wiki is configured. 

Already configured... return to the wiki.

(You should probably remove this directory for added security.)
" ); } if( file_exists( "./LocalSettings.php" ) ) { writeSuccessMessage(); dieout( '' );
 } if( !is_writable( "." ) ) { dieout( "
Can't write config file, aborting

In order to configure the wiki you have to make the config subdirectory writable by the 
web server. Once configuration is done you'll move the created LocalSettings.php to the 
parent directory, and for added safety you can then remove the config subdirectory 
entirely.

To make the directory writable on a Unix/Linux system:

cd /path/to/wiki
chmod a+w config

" ); } require_once( "install-utils.inc" ); require_once( "maintenance/updaters.inc" ); 
class ConfigData { function getEncoded( $data ) { # removing latin1 support, no need... 
return $data; } function getSitename() { return $this->getEncoded( $this->Sitename ); } 
function getSysopName() { return $this->getEncoded( $this->SysopName ); } function 
getSysopPass() { return $this->getEncoded( $this->SysopPass ); } } ?> 

Please include all of the lines below when reporting installation problems.
Checking environment...
PHP " . phpversion() . ": ok\n"; if( ini_get( "register_globals" ) ) { ?> 
Warning: PHP's register_globals option is enabled. MediaWiki will work correctly, but 
this setting increases your exposure to potential security vulnerabilities in PHP-based 
software running on your server. You should disable it if you are able.
Fatal: magic_quotes_runtime is active! This option corrupts data input unpredictably; you 
cannot install or use MediaWiki unless this option is disabled. 
Fatal: magic_quotes_sybase is active! This option corrupts data input unpredictably; you 
cannot install or use MediaWiki unless this option is disabled. 
Fatal: mbstring.func_overload is active! This option causes errors and may corrupt data 
unpredictably; you cannot install or use MediaWiki unless this option is disabled. 

Cannot install wiki.
" ); } if( ini_get( "safe_mode" ) ) { $conf->safeMode = true; ?> 
Warning: PHP's safe mode is active. You may have problems caused by this, particularly if 
using image uploads. 
safeMode = false; } $sapi = php_sapi_name(); $conf->prettyURLs = true; print "
PHP server API is $sapi; "; switch( $sapi ) { case "apache": case "apache2handler": print 
"ok, using pretty URLs (index.php/Page_Title)"; break; case "cgi": case "cgi-fcgi": case 
"apache2filter": print "using ugly URLs (index.php?title=Page_Title)"; $conf->prettyURLs 
= false; break; default: print "unknown; using pretty URLs (index.php/Page_Title), if you 
have trouble change this in LocalSettings.php"; } print "
\n"; $conf->xml = function_exists( "utf8_encode" ); if( $conf->xml ) { print "
Have XML / Latin1-UTF-8 conversion support.
\n"; } else { dieout( "PHP's XML module is missing; the wiki requires functions in this 
module and won't work in this configuration. If you're running Mandrake, install the php-
xml package." ); } $memlimit = ini_get( "memory_limit" ); $conf->raiseMemory = false; if( 
empty( $memlimit ) || $memlimit == -1 ) { print "
PHP is configured with no memory_limit.
\n"; } else { print "
PHP's memory_limit is " . htmlspecialchars( $memlimit ) . ". If this is too low, 
installation may fail! "; $n = IntVal( $memlimit ); if( preg_match( '/^([0-9]+)[Mm]$/', 
trim( $memlimit ), $m ) ) { $n = IntVal( $m[1] * (1024*1024) ); } if( $n < 20*1024*1024 ) 
{ print "Attempting to raise limit to 20M... "; if( false === ini_set( "memory_limit", 
"20M" ) ) { print "failed."; } else { $conf->raiseMemory = true; print "ok."; } } print "
\n"; } $conf->zlib = function_exists( "gzencode" ); if( $conf->zlib ) { print "
Have zlib support; enabling output compression.
\n"; } else { print "
No zlib support.
\n"; } $conf->turck = function_exists( 'mmcache_get' ); if ( $conf->turck ) { print "
Turck MMCache installed
\n"; } $conf->eaccel = function_exists( 'eaccelerator_get' ); if ( $conf->eaccel ) { 
$conf->turck = 'eaccelerator'; print "
eAccelerator installed
\n"; } if (!$conf->turck && !$conf->eaccel) { print "
Neither Turck MMCache nor eAccelerator are installed, " . "can't use object caching 
functions
\n"; } $conf->diff3 = false; $diff3locations = array("/usr/bin", "/opt/csw/bin", "/usr/
gnu/bin", "/usr/sfw/bin") + explode(":", getenv("PATH")); $diff3names = array("gdiff3", 
"diff3"); $diff3versioninfo = array('$1 --version 2>&1', 'diff3 (GNU diffutils)'); 
foreach ($diff3locations as $loc) { $exe = locate_executable($loc, $diff3names, 
$diff3versioninfo); if ($exe !== false) { $conf->diff3 = $exe; break; } } if ($conf-
>diff3) print "
Found GNU diff3: $conf->diff3.
"; else print "
GNU diff3 not found.
"; $conf->ImageMagick = false; $imcheck = array( "/usr/bin", "/usr/local/bin", "/sw/bin", 
"/opt/local/bin" ); foreach( $imcheck as $dir ) { $im = "$dir/convert"; if( file_exists( 
$im ) ) { print "
Found ImageMagick: $im; image thumbnailing will be enabled if you enable uploads.
\n"; $conf->ImageMagick = $im; break; } } $conf->HaveGD = function_exists( "imagejpeg" ); 
if( $conf->HaveGD ) { print "
Found GD graphics library built-in"; if( !$conf->ImageMagick ) { print ", image 
thumbnailing will be enabled if you enable uploads"; } print ".
\n"; } else { if( !$conf->ImageMagick ) { print "
Couldn't find GD library or ImageMagick; image thumbnailing disabled.
\n"; } } $conf->UseImageResize = $conf->HaveGD || $conf->ImageMagick; # $conf->IP = "/
Users/brion/Sites/inplace"; $conf->IP = dirname( dirname( __FILE__ ) ); print "
Installation directory: " . htmlspecialchars( $conf->IP ) . "
\n"; # $conf->ScriptPath = "/~brion/inplace"; $conf->ScriptPath = preg_replace( '{^(.*)/
config.*$}', '$1', $_SERVER["PHP_SELF"] ); # was SCRIPT_NAME print "
Script URI path: " . htmlspecialchars( $conf->ScriptPath ) . "
\n"; $conf->posted = ($_SERVER["REQUEST_METHOD"] == "POST"); $conf->Sitename = ucfirst( 
importPost( "Sitename", "" ) ); $defaultEmail = empty( $_SERVER["SERVER_ADMIN"] ) ? 
'root@localhost' : $_SERVER["SERVER_ADMIN"]; $conf->EmergencyContact = importPost( 
"EmergencyContact", $defaultEmail ); $conf->DBserver = importPost( "DBserver", 
"localhost" ); $conf->DBname = importPost( "DBname", "wikidb" ); $conf->DBuser = 
importPost( "DBuser", "wikiuser" ); $conf->DBpassword = importPost( "DBpassword" ); 
$conf->DBpassword2 = importPost( "DBpassword2" ); $conf->DBprefix = importPost( 
"DBprefix" ); $conf->DBmysql5 = (importPost( "DBmysql5" ) == "true") ? "true" : "false"; 
$conf->RootPW = importPost( "RootPW" ); $conf->LanguageCode = importPost( "LanguageCode", 
"en" ); $conf->SysopName = importPost( "SysopName", "WikiSysop" ); $conf->SysopPass = 
importPost( "SysopPass" ); $conf->SysopPass2 = importPost( "SysopPass2" ); /* Check for 
validity */ $errs = array(); if( $conf->Sitename == "" || $conf->Sitename == "MediaWiki" 
|| $conf->Sitename == "Mediawiki" ) { $errs["Sitename"] = "Must not be blank or 
\"MediaWiki\"."; } if( $conf->DBuser == "" ) { $errs["DBuser"] = "Must not be blank"; } 
if( $conf->DBpassword == "" ) { $errs["DBpassword"] = "Must not be blank"; } if( $conf-
>DBpassword != $conf->DBpassword2 ) { $errs["DBpassword2"] = "Passwords don't match!"; } 
if( !preg_match( '/^[A-Za-z_0-9]*$/', $conf->DBprefix ) ) { $errs["DBprefix"] = "Invalid 
table prefix"; } if( $conf->SysopPass == "" ) { $errs["SysopPass"] = "Must not be blank";
 } if( $conf->SysopPass != $conf->SysopPass2 ) { $errs["SysopPass2"] = "Passwords don't 
match!"; } $conf->License = importRequest( "License", "none" ); if( $conf->License == 
"gfdl" ) { $conf->RightsUrl = "http://www.gnu.org/copyleft/fdl.html"; $conf->RightsText = 
"GNU Free Documentation License 1.2"; $conf->RightsCode = "gfdl"; $conf->RightsIcon = 
'${wgStylePath}/common/images/gnu-fdl.png'; } elseif( $conf->License == "none" ) { $conf-
>RightsUrl = $conf->RightsText = $conf->RightsCode = $conf->RightsIcon = ""; } else { 
$conf->RightsUrl = importRequest( "RightsUrl", "" ); $conf->RightsText = importRequest( 
"RightsText", "" ); $conf->RightsCode = importRequest( "RightsCode", "" ); $conf-
>RightsIcon = importRequest( "RightsIcon", "" ); } $conf->Shm = importRequest( "Shm", 
"none" ); $conf->MCServers = importRequest( "MCServers" ); /* Test memcached servers */ 
if ( $conf->Shm == 'memcached' && $conf->MCServers ) { $conf->MCServerArray = array_map( 
'trim', explode( ',', $conf->MCServers ) ); foreach ( $conf->MCServerArray as $server ) { 
$error = testMemcachedServer( $server ); if ( $error ) { $errs["MCServers"] = $error; 
break; } } } else if ( $conf->Shm == 'memcached' ) { $errs["MCServers"] = "Please specify 
at least one server if you wish to use memcached"; } /* default values for installation 
*/ $conf->Email =importRequest("Email", "email_enabled"); $conf-
>Emailuser=importRequest("Emailuser", "emailuser_enabled"); $conf->Enotif 
=importRequest("Enotif", "enotif_allpages"); $conf->Eauthent =importRequest("Eauthent", 
"eauthent_enabled"); if( $conf->posted && ( 0 == count( $errs ) ) ) { do { /* So we can 
'continue' to end prematurely */ $conf->Root = ($conf->RootPW != ""); /* Load up the 
settings and get installin' */ $local = writeLocalSettings( $conf ); $wgCommandLineMode = 
false; chdir( ".." ); eval($local); $wgDBadminuser = "root"; $wgDBadminpassword = $conf-
>RootPW; $wgDBprefix = $conf->DBprefix; $wgCommandLineMode = true; $wgUseDatabaseMessages 
= false; /* FIXME: For database failure */ require_once( "includes/Setup.php" ); chdir( 
"config" ); require_once( "maintenance/InitialiseMessages.inc" ); $wgTitle = Title::
newFromText( "Installation script" ); $mysqlOldClient = version_compare( 
mysql_get_client_info(), "4.1.0", "lt" ); if( $mysqlOldClient ) { print "
PHP is linked with old MySQL client libraries. If you are using a MySQL 4.1 server and 
have problems connecting to the database, see http://dev.mysql.com/doc/mysql/en/old-
client.html for help.
\n"; } print "
Trying to connect to MySQL on $wgDBserver as root...\n"; $wgDatabase = Database::
newFromParams( $wgDBserver, "root", $conf->RootPW, "", 1 ); if( $wgDatabase->isOpen() ) { 
$myver = mysql_get_server_info( $wgDatabase->mConn ); $wgDatabase->ignoreErrors(true); 
$conf->Root = true; print "
Connected as root (automatic)
\n"; } else { print "
MySQL error " . ($err = mysql_errno() ) . ": " . htmlspecialchars( mysql_error() ) . "
"; $ok = false; switch( $err ) { case 1045: case 2000: if( $conf->Root ) { 
$errs["RootPW"] = "Check password"; } else { print "
Trying regular user...\n"; /* Try the regular user... */ $wgDBadminuser = $wgDBuser; 
$wgDBadminpassword = $wgDBpassword; /* Wait one second for connection rate limiting, 
present on some systems */ sleep(1); $wgDatabase = Database::newFromParams( $wgDBserver, 
$wgDBuser, $wgDBpassword, "", 1 ); if( !$wgDatabase->isOpen() ) { print "
MySQL error " . ($err = mysql_errno() ) . ": " . htmlspecialchars( mysql_error() ) . "
"; $errs["DBuser"] = "Check name/pass"; $errs["DBpassword"] = "or enter root"; 
$errs["DBpassword2"] = "password below"; $errs["RootPW"] = "Got root?"; } else { $myver = 
mysql_get_server_info( $wgDatabase->mConn ); $wgDatabase->ignoreErrors(true); $conf->Root 
= false; $conf->RootPW = ""; print " ok.\n"; # And keep going... $ok = true; } break; } 
case 2002: case 2003: $errs["DBserver"] = "Connection failed"; break; default: 
$errs["DBserver"] = "Couldn't connect to database ($err)"; break; } if( !$ok ) continue;
 } if ( !$wgDatabase->isOpen() ) { $errs["DBserver"] = "Couldn't connect to database"; 
continue; } print "
Connected to $myver"; if( version_compare( $myver, "4.0.0" ) >= 0 ) { print "; enabling 
MySQL 4 enhancements"; $conf->DBmysql4 = true; $local = writeLocalSettings( $conf ); } 
$mysqlNewAuth = version_compare( $myver, "4.1.0", "ge" ); if( $mysqlNewAuth && 
$mysqlOldClient ) { print "; You are using MySQL 4.1 server, but PHP is linked to old 
client libraries; if you have trouble with authentication, see http://dev.mysql.com/doc/
mysql/en/old-client.html for help."; } if( $wgDBmysql5 ) { if( $mysqlNewAuth ) { print "; 
enabling MySQL 4.1/5.0 charset mode"; } else { print "; MySQL 4.1/5.0 charset mode 
enabled, but older version detected; will likely fail."; } } print "
\n"; @$sel = mysql_select_db( $wgDBname, $wgDatabase->mConn ); if( $sel ) { print "
Database " . htmlspecialchars( $wgDBname ) . " exists
\n"; } else { $err = mysql_errno(); if ( $err != 1049 ) { print "
Error selecting database $wgDBname: $err " . htmlspecialchars( mysql_error() ) . "
"; continue; } $res = $wgDatabase->query( "CREATE DATABASE `$wgDBname`" ); if( !$res ) { 
print "
Couldn't create database " . htmlspecialchars( $wgDBname ) . "; try with root access or 
check your username/pass.
\n"; $errs["RootPW"] = "<- Enter"; continue; } print "
Created database " . htmlspecialchars( $wgDBname ) . "
\n"; } $wgDatabase->selectDB( $wgDBname ); if( $wgDatabase->tableExists( "cur" ) || 
$wgDatabase->tableExists( "revision" ) ) { print "
There are already MediaWiki tables in this database. Checking if updates are needed...
\n"; # Create user if required if ( $conf->Root ) { $conn = Database::newFromParams( 
$wgDBserver, $wgDBuser, $wgDBpassword, $wgDBname, 1 ); if ( $conn->isOpen() ) { print "
DB user account ok
\n"; $conn->close(); } else { print "
Granting user permissions..."; if( $mysqlOldClient && $mysqlNewAuth ) { print " If the 
next step fails, see http://dev.mysql.com/doc/mysql/en/old-client.html for help."; } 
print "
\n"; dbsource( "../maintenance/users.sql", $wgDatabase ); } } print "

\n";
chdir( ".." );
flush();
do_all_updates();
chdir( "config" );

print "
\n"; print "
Finished update checks.
\n"; } else { # FIXME: Check for errors print "
Creating tables..."; if( $wgDBmysql5 ) { print " using MySQL 5 table defs..."; dbsource( 
"../maintenance/mysql5/tables.sql", $wgDatabase ); } else { print " using MySQL 3/4 table 
defs..."; dbsource( "../maintenance/tables.sql", $wgDatabase ); } dbsource( "../
maintenance/interwiki.sql", $wgDatabase ); print " done.
\n"; print "
Initializing data..."; $wgDatabase->insert( 'site_stats', array( 'ss_row_id' => 1, 
'ss_total_views' => 0, 'ss_total_edits' => 0, 'ss_good_articles' => 0 ) ); # setting up 
the db user if( $conf->Root ) { print "
Granting user permissions...
\n"; dbsource( "../maintenance/users.sql", $wgDatabase ); } if( $conf->SysopName ) { $u = 
User::newFromName( $conf->getSysopName() ); if ( 0 == $u->idForName() ) { $u-
>addToDatabase(); $u->setPassword( $conf->getSysopPass() ); $u->saveSettings(); $u-
>addGroup( "sysop" ); $u->addGroup( "bureaucrat" ); print "
Created sysop account " . htmlspecialchars( $conf->SysopName ) . ".
\n"; } else { print "
Could not create user - already exists!
\n"; } } else { print "
Skipped sysop account creation, no name given.
\n"; } $titleobj = Title::newFromText( wfMsgNoDB( "mainpage" ) ); $article = new Article( 
$titleobj ); $newid = $article->insertOn( $wgDatabase ); $revision = new Revision( array( 
'page' => $newid, 'text' => wfMsg( 'mainpagetext' ) . "\n\n" . wfMsg( 'mainpagedocfooter'
 ), 'comment' => '', 'user' => 0, 'user_text' => 'MediaWiki default', ) ); $revid = 
$revision->insertOn( $wgDatabase ); $article->updateRevisionOn( $wgDatabase, $revision ); 
print "

";
initialiseMessages();
print "
\n"; } /* Write out the config file now that all is well */ print "

Creating LocalSettings.php...
\n\n"; $localSettings = "<" . "?php$endl$local$endl?" . ">"; // Fix up a common line-
ending problem (due to CVS on Windows) $localSettings = str_replace( "\r\n", "\n", 
$localSettings ); if( version_compare( phpversion(), "4.3.2" ) >= 0 ) { $xt = "xt"; # 
Refuse to overwrite an existing file } else { $xt = "wt"; # 'x' is not available prior to 
PHP 4.3.2. We did check above, but race conditions blah blah } $f = fopen( 
"LocalSettings.php", $xt ); if( $f == false ) { dieout( "

Couldn't write out LocalSettings.php. Check that the directory permissions are correct 
and that there isn't already a file of that name here...
\n" . "

Here's the file that would have been written, try to paste it into place manually:
\n" . "

\n" . htmlspecialchars( $localSettings ) . "
\n" ); } if(fwrite( $f, $localSettings ) ) { fclose( $f ); writeSuccessMessage(); } else 
{ fclose( $f ); die("

An error occured while writing the config/LocalSettings.php file. Check user rights and 
disk space then try again.
\n"); } } while( false ); } ?> 
posted ) { echo "

Something's not quite right yet; make sure everything below is filled out correctly.
\n"; } ?> 
Site config
Your site name should be a relatively short word. It'll appear as the namespace name for 
'meta' pages as well as throughout the user interface. Good site names are things like 
"Wikipedia" and "OpenFacts"; avoid punctuation, which may cause problems. 
This will be used as the return address for password reminders and may be displayed in 
some error conditions so visitors can get in touch with you. It is also be used as the 
default sender address of e-mail notifications (enotifs). 
Language
 
You may select the language for the user interface of the wiki... Some localizations are 
less complete than others. Unicode (UTF-8 encoding) is used for all localizations. 
Copyright/license metadata
Select one:
ScriptPath}/config/index.php?License=cc&RightsUrl=[license_url]&RightsText=[license_name]
&RightsCode=[license_code]&RightsIcon=[license_button]" ); $icon = urlencode( 
"$wgServer$wgUploadPath/wiki.png" ); $ccApp = htmlspecialchars( "http://creativecommons.
org/license/?partner=$partner&exit_url=$exit&partner_icon_url=$icon" ); print "choose"; ?
> (link will wipe out any other data in this form!) License == "cc" ) { ?> 
RightsIcon ) . "\" alt='icon' />", "hidden" ); ?>
RightsText ), "hidden" ); ?>
RightsCode ), "hidden" ); ?>
RightsUrl ) . "\">" . htmlspecialchars( $conf->RightsUrl ) . "", "hidden" ); ?>
MediaWiki can include a basic license notice, icon, and machine-readable copyright 
metadata if your wiki's content is to be licensed under the GNU FDL or a Creative Commons 
license. If you're not sure, leave it at "none". 
A sysop user account can lock or delete pages, block problematic IP addresses from 
editing, and other maintenance tasks. If creating a new wiki database, a sysop account 
will be created with the given name and password. 
Shared memory caching
Select one:
turck ) { echo "
"; aField( $conf, "Shm", "Turck MMCache", "radio", "turck" ); echo "
"; } ?> eaccel ) { echo "
"; aField( $conf, "Shm", "eAccelerator", "radio", "eaccel" ); echo "
"; } ?> 
Using a shared memory system such as Turck MMCache, eAccelerator, or Memcached will speed 
up MediaWiki significantly. Memcached is the best solution but needs to be installed. 
Specify the server addresses and ports in a comma-separted list. Only use Turck shared 
memory if the wiki will be running on a single Apache server. 
E-mail, e-mail notification and authentication setup
E-mail (general)
Select one:
Use this to disable all e-mail functions (send a password reminder, user-to-user e-mail 
and e-mail notification), if sending e-mails on your server doesn't work. 
User-to-user e-mail
Select one:
Use this to disable only the user-to-user e-mail function (EmailUser). 
E-mail notification
Select one:

E-mail notification sends a notification e-mail to a user, when the user_talk page is 
changed and/or when watch-listed pages are changed, depending on the above settings. When 
testing this feature, be reminded, that obviously an e-mail address must be present in 
your preferences and that your own changes never trigger notifications to be sent to 
yourself.

Users get corresponding options to select or deselect in their users' preferences. The 
user options are not shown on the preference page, if e-mail notification is disabled.

There are additional options for fine tuning in /includes/DefaultSettings.php .
E-mail address authentication
Select one:

E-mail address authentication uses a scheme to authenticate e-mail addresses of the 
users. The user who initially enters or changes his/her stored e-mail address gets a link 
with a token mailed to that address. The stored e-mail address is authenticated at the 
moment the user comes back to the wiki via the link.

The e-mail address stays authenticated as long as the user does not change it; the time 
of authentication is indicated on the user preference page.

If the option is enabled, only authenticated e-mail addresses can receive EmailUser mails 
and/or e-mail notification mails.
Database config
If your database server isn't on your web server, enter the name or IP address here. 
If you only have a single user account and database available, enter those here. If you 
have database root access (see below) you can specify new accounts/databases to be 
created. 

If you need to share one database between multiple wikis, or MediaWiki and another web 
application, you may choose to add a prefix to all the table names to avoid conflicts.

Avoid exotic characters; something like mw_ is good.
Database charset
Select one:
EXPERIMENTAL: You can enable explicit Unicode charset support for MySQL 4.1 and 5.0 
servers. This is not well tested and may cause things to break. If upgrading an older 
installation, leave in backwards-compatible mode. 
You will only need this if the database and/or user account above don't already exist. Do 
not type in your machine's root password! MySQL has its own "root" user with a separate 
password. (It might even be blank, depending on your configuration.) 
 
 
Installation successful! 

To complete the installation, please do the following: 
Download config/LocalSettings.php with your FTP client or file manager
Upload it to the parent directory
Delete config/LocalSettings.php
Start using your wiki! 

If you are in a shared hosting environment, do not just move LocalSettings.php remotely. 
LocalSettings.php is currently owned by the user your webserver is running under, which 
means that anyone on the same server can read your database password! Downloading it and 
uploading it again will hopefully change the ownership to a user ID specific to you.
EOT; } else { echo "

Installation successful! Move the config/LocalSettings.php file into the parent 
directory, then follow this link to your wiki.
\n"; } } function escapePhpString( $string ) { return strtr( $string, array( "\n" => 
"\\n", "\r" => "\\r", "\t" => "\\t", "\\" => "\\\\", "\$" => "\\\$", "\"" => "\\\"" )); } 
function writeLocalSettings( $conf ) { $conf->DBmysql4 = @$conf->DBmysql4 ? 'true' : 
'false'; $conf->UseImageResize = $conf->UseImageResize ? 'true' : 'false'; $conf-
>PasswordSender = $conf->EmergencyContact; $zlib = ($conf->zlib ? "" : "# "); $magic = 
($conf->ImageMagick ? "" : "# "); $convert = ($conf->ImageMagick ? $conf->ImageMagick : 
"/usr/bin/convert" ); $pretty = ($conf->prettyURLs ? "" : "# "); $ugly = ($conf-
>prettyURLs ? "# " : ""); $rights = ($conf->RightsUrl) ? "" : "# "; $hashedUploads = 
$conf->safeMode ? '' : '# '; switch ( $conf->Shm ) { case 'memcached': $cacheType = 
'CACHE_MEMCACHED'; $mcservers = var_export( $conf->MCServerArray, true ); break; case 
'turck': case 'eaccel': $cacheType = 'CACHE_ACCEL'; $mcservers = 'array()'; break; 
default: $cacheType = 'CACHE_NONE'; $mcservers = 'array()'; } if ( $conf->Email == 
'email_enabled' ) { $enableemail = 'true'; $enableuseremail = ( $conf->Emailuser == 
'emailuser_enabled' ) ? 'true' : 'false' ; $eauthent = ( $conf->Eauthent == 
'eauthent_enabled' ) ? 'true' : 'false' ; switch ( $conf->Enotif ) { case 
'enotif_usertalk': $enotifusertalk = 'true'; $enotifwatchlist = 'false'; break; case 
'enotif_allpages': $enotifusertalk = 'true'; $enotifwatchlist = 'true'; break; default: 
$enotifusertalk = 'false'; $enotifwatchlist = 'false'; } } else { $enableuseremail = 
'false'; $enableemail = 'false'; $eauthent = 'false'; $enotifusertalk = 'false'; 
$enotifwatchlist = 'false'; } $file = @fopen( "/dev/urandom", "r" ); if ( $file ) { 
$secretKey = bin2hex( fread( $file, 32 ) ); fclose( $file ); } else { $secretKey = ""; 
for ( $i=0; $i<8; $i++ ) { $secretKey .= dechex(mt_rand(0, 0x7fffffff)); } print "
Warning: \$wgSecretKey key is insecure, generated with mt_rand(). Consider changing it 
manually.
\n"; } # Add slashes to strings for double quoting $slconf = array_map( 
"escapePhpString", get_object_vars( $conf ) ); if( $conf->License == 'gfdl' ) { # Needs 
literal string interpolation for the current style path $slconf['RightsIcon'] = $conf-
>RightsIcon; } $sep = (DIRECTORY_SEPARATOR == "\\") ? ";" : ":"; $localsettings = " # 
This file was automatically generated by the MediaWiki installer. # If you make manual 
changes, please keep track in case you need to # recreate them later. \$IP = 
\"{$slconf['IP']}\"; ini_set( \"include_path\", \".$sep\$IP$sep\$IP/includes$sep\$IP/
languages\" ); require_once( \"includes/DefaultSettings.php\" ); # If PHP's memory limit 
is very low, some operations may fail. " . ($conf->raiseMemory ? '' : '# ' ) . "ini_set( 
'memory_limit', '20M' );" . " if ( \$wgCommandLineMode ) { if ( isset( \$_SERVER ) && 
array_key_exists( 'REQUEST_METHOD', \$_SERVER ) ) { die( \"This script must be run from 
the command line\\n\" ); } } elseif ( empty( \$wgNoOutputBuffer ) ) { ## Compress output 
if the browser supports it {$zlib}if( !ini_get( 'zlib.output_compression' ) ) @ob_start( 
'ob_gzhandler' ); } \$wgSitename = \"{$slconf['Sitename']}\"; \$wgScriptPath = 
\"{$slconf['ScriptPath']}\"; \$wgScript = \"\$wgScriptPath/index.php\"; 
\$wgRedirectScript = \"\$wgScriptPath/redirect.php\"; ## If using PHP as a CGI module, 
use the ugly URLs {$pretty}\$wgArticlePath = \"\$wgScript/\$1\"; {$ugly}\$wgArticlePath = 
\"\$wgScript?title=\$1\"; \$wgStylePath = \"\$wgScriptPath/skins\"; \$wgStyleDirectory = 
\"\$IP/skins\"; \$wgLogo = \"\$wgStylePath/common/images/wiki.png\"; \$wgUploadPath = 
\"\$wgScriptPath/images\"; \$wgUploadDirectory = \"\$IP/images\"; \$wgEnableEmail = 
$enableemail; \$wgEnableUserEmail = $enableuseremail; \$wgEmergencyContact = 
\"{$slconf['EmergencyContact']}\"; \$wgPasswordSender = \"{$slconf['PasswordSender']}\"; 
## For a detailed description of the following switches see ## http://meta.wikimedia.org/
Enotif and http://meta.wikimedia.org/Eauthent ## There are many more options for fine 
tuning available see ## /includes/DefaultSettings.php ## UPO means: this is also a user 
preference option \$wgEnotifUserTalk = $enotifusertalk; # UPO \$wgEnotifWatchlist = 
$enotifwatchlist; # UPO \$wgEmailAuthentication = $eauthent; \$wgDBserver = 
\"{$slconf['DBserver']}\"; \$wgDBname = \"{$slconf['DBname']}\"; \$wgDBuser = 
\"{$slconf['DBuser']}\"; \$wgDBpassword = \"{$slconf['DBpassword']}\"; \$wgDBprefix = 
\"{$slconf['DBprefix']}\"; # If you're on MySQL 3.x, this next line must be FALSE: 
\$wgDBmysql4 = {$conf->DBmysql4}; # Experimental charset support for MySQL 4.1/5.0. 
\$wgDBmysql5 = {$conf->DBmysql5}; ## Shared memory settings \$wgMainCacheType = 
$cacheType; \$wgMemCachedServers = $mcservers; ## To enable image uploads, make sure the 
'images' directory ## is writable, then uncomment this: # \$wgEnableUploads = true; 
\$wgUseImageResize = {$conf->UseImageResize}; {$magic}\$wgUseImageMagick = true; {$magic}
\$wgImageMagickConvertCommand = \"{$convert}\"; ## If you want to use image uploads under 
safe mode, ## create the directories images/archive, images/thumb and ## images/temp, and 
make them all writable. Then uncomment ## this, if it's not already uncommented: 
{$hashedUploads}\$wgHashedUploadDirectory = false; ## If you have the appropriate support 
software installed ## you can enable inline LaTeX equations: # \$wgUseTeX = true; 
\$wgMathPath = \"{\$wgUploadPath}/math\"; \$wgMathDirectory = \"{\$wgUploadDirectory}/
math\"; \$wgTmpDirectory = \"{\$wgUploadDirectory}/tmp\"; \$wgLocalInterwiki = 
\$wgSitename; \$wgLanguageCode = \"{$slconf['LanguageCode']}\"; \$wgProxyKey = 
\"$secretKey\"; ## Default skin: you can change the default skin. Use the internal 
symbolic ## names, ie 'standard', 'nostalgia', 'cologneblue', 'monobook': # 
\$wgDefaultSkin = 'monobook'; ## For attaching licensing metadata to pages, and 
displaying an ## appropriate copyright notice / icon. GNU Free Documentation ## License 
and Creative Commons licenses are supported so far. {$rights}\$wgEnableCreativeCommonsRdf 
= true; \$wgRightsPage = \"\"; # Set to the title of a wiki page that describes your 
license/copyright \$wgRightsUrl = \"{$slconf['RightsUrl']}\"; \$wgRightsText = 
\"{$slconf['RightsText']}\"; \$wgRightsIcon = \"{$slconf['RightsIcon']}\"; # 
\$wgRightsCode = \"{$slconf['RightsCode']}\"; # Not yet used \$wgDiff3 = 
\"{$slconf['diff3']}\"; "; // Keep things in Unix line endings internally; // the system 
will write out as local text type. return str_replace( "\r\n", "\n", $localsettings ); } 
function dieout( $text ) { die( $text . "\n\n\n" ); } function importVar( &$var, $name, 
$default = "" ) { if( isset( $var[$name] ) ) { $retval = $var[$name]; if ( 
get_magic_quotes_gpc() ) { $retval = stripslashes( $retval ); } } else { $retval = 
$default; } return $retval; } function importPost( $name, $default = "" ) { return 
importVar( $_POST, $name, $default ); } function importRequest( $name, $default = "" ) { 
return importVar( $_REQUEST, $name, $default ); } function aField( &$conf, $field, $text, 
$type = "", $value = "" ) { if( $type != "" ) { $xtype = "type=\"$type\""; } else { 
$xtype = ""; } if(!(isset($id)) or ($id == "") ) $id = $field; $nolabel = ($type == 
"radio") || ($type == "hidden"); if( $nolabel ) { echo "\t\t"; } else { echo 
"\t\t$text\n"; } if( $type == "radio" && $value == $conf->$field ) { $checked = 
"checked='checked'"; } else { $checked = ""; } echo "\t\t$field ); } echo "\" />\n"; if( 
$nolabel ) { echo " $text\n"; } global $errs; if(isset($errs[$field])) echo "" . 
$errs[$field] . "\n"; } function getLanguageList() { global $wgLanguageNames; if( !isset( 
$wgLanguageNames ) ) { $wgContLanguageCode = "xxx"; function wfLocalUrl( $x ) { return 
$x; } function wfLocalUrlE( $x ) { return $x; } require_once( "languages/Names.php" ); } 
$codes = array(); $d = opendir( "../languages" ); while( false !== ($f = readdir( $d ) )
 ) { if( preg_match( '/Language([A-Z][a-z_]+)\.php$/', $f, $m ) ) { $code = str_replace( 
'_', '-', strtolower( $m[1] ) ); if( isset( $wgLanguageNames[$code] ) ) { $name = $code . 
' - ' . $wgLanguageNames[$code]; } else { $name = $code; } $codes[$code] = $name; } } 
closedir( $d ); ksort( $codes ); return $codes; } #Check for location of an executable # 
@param string $loc single location to check # @param array $names filenames to check for. 
# @param mixed $versioninfo array of details to use when checking version, use false for 
no version checking function locate_executable($loc, $names, $versioninfo = false) { if 
(!is_array($names)) $names = array($names); foreach ($names as $name) { if 
(file_exists("$loc/$name")) { if (!$versioninfo) return "$loc/$name"; $file = 
str_replace('$1', "$loc/$name", $versioninfo[0]); if (strstr(`$file`, $versioninfo[1]) !
== false) return "$loc/$name"; } } return false; } # Test a memcached server function 
testMemcachedServer( $server ) { $hostport = explode(":", $server); $errstr = false; $fp 
= false; if ( !function_exists( 'fsockopen' ) ) { $errstr = "Can't connect to memcached, 
fsockopen() not present"; } if ( !$errstr && count( $hostport ) != 2 ) { $errstr = 
'Please specify host and port'; var_dump( $hostport ); } if ( !$errstr ) { list( $host, 
$port ) = $hostport; $errno = 0; $fsockerr = ''; $fp = @fsockopen( $host, $port, $errno, 
$fsockerr, 1.0 ); if ( $fp === false ) { $errstr = "Cannot connect to memcached on $host:
$port : $fsockerr"; } } if ( !$errstr ) { $command = "version\r\n"; $bytes = fwrite( $fp, 
$command ); if ( $bytes != strlen( $command ) ) { $errstr = "Cannot write to memcached 
socket on $host:$port"; } } if ( !$errstr ) { $expected = "VERSION "; $response = fread( 
$fp, strlen( $expected ) ); if ( $response != $expected ) { $errstr = "Didn't get correct 
memcached response from $host:$port"; } } if ( $fp ) { fclose( $fp ); } if ( !$errstr ) { 
echo "
Connected to memcached on $host:$port successfully"; } return $errstr; } ?>